-
VF Porcelánico
Ventilated facade system using porcelain stoneware.
It differs from other methods due to its double anchorage system: one is chemical, using a high-performance polyurethane filler, and the other is mechanical using stainless steel staples that ensure the bonding of porcelain stoneware to the metallic structure of the facade.
PORCELANOSA rectified porcelain stoneware plates are reinforced at the back with a fibreglass mesh that prevents fragments from falling in the event of breakage. To use the hidden anchoring technique, they are supplied with side grooves so that they can be attached to the facade structure.
Metallic structure of ventilated facade- Mechanically anchoring the facade to the enclosure, according to the type of support.
- L-shaped aluminium separators determine the cavity between the enclosure and the ceramic coating.
- Vertical aluminium pillars onto which the porcelain stoneware plates are fitted.
- Stainless steel staples for anchoring the ceramic to the vertical pillars.
- Self-drilling screws to connect vertical pillars and aluminium separators.
The metallic structure of the ventilated facade is made of AW 6005A aluminium, while the staples and mechanical anchors are AISI 304 stainless steel.
Main features- Anchoring the facade directly to the building structure.
- Minimum distance of 80 mm between support and facade.
- Very light facade structure: less than 5 kg/m².
- Dual chemical and mechanical anchorage system; full security.
- Plane modulation and level with the facade. Horizontal or vertical angle. With straight or locked joints.
- Horizontal placement joints of between 5 mm and 8 mm in width. Vertical placement joints from 1 mm in width.
- Possibility of placement in "fish scale" design.
- Wide variety of formats: from 297 mm x 596 mm to 596 mm x 1800 mm.
- High chemical resistance: breaking force greater than 2000 N, in accordance with UNE-EN ISO 10545-5.
- Mesh on the back of the pieces to prevent fragments from falling in the event of breakage.
- Resistance to climate agents; the elements' physical appearance remains unchanged with the passage of time.
- Easy to clean in the event of paint marks or graffiti.
VF Porcelánico
Ventilated facade with hidden anchorage.
The porcelain stoneware pieces are supplied with side grooves which fit into the staples' fastening clips and are hidden from view.
Technical details
VF Porcelánico
Ventilated facade with visible anchorage.
The porcelain stoneware pieces fit into a stainless steel staple in such a way that the fastening clips remain visible. Depending on the coating model, it is possible to wash the couplings, depending on the RAL the client has chosen.
Technical details -
VF XLIGHT/XTONE
Ventilated facade system using XLIGHT/XTONE porcelain stoneware.
It differs from other methods due to its double anchorage system: one is chemical, using a high-performance polyurethane filler, and the other is mechanical using stainless steel staples that ensure the bonding of porcelain stoneware to the metallic structure of the facade.
URBATEK XLIGHT porcelain stoneware plates are characterised by their large size, measuring up to 1200 mm x 2500 mm and 6 mm thick; very low water absorption, less than 0.1%, in accordance with UNE-EN ISO 10545-3; and are reinforced at the back with a fibreglass mesh that prevents fragments from falling in the event of breakage. The pieces used in XLIGHT ventilated facades with hidden anchorage are supplied fixed to a metal substructure that allows them to be fixed on to the building structure.
Metallic structure of ventilated facade- Mechanically anchoring the facade to the enclosure, according to the type of support.
- L-shaped aluminium separators determine the cavity between the enclosure and the ceramic coating.
- Vertical aluminium pillars onto which the porcelain stoneware pieces are fitted.
- Stainless steel staples for anchoring the XLIGHT plates to the vertical pillars.
- Self-drilling screws to connect vertical pillars and aluminium separators.
The metallic structure of the ventilated facade is made of AW 6005A aluminium, while the mechanical anchors are AISI 304 stainless steel.
Main features- Anchoring the facade directly to the building structure.
- Minimum distance of 80 mm between support and facade.
- Very light facade structure: less than 5 kg/m².
- Dual chemical and mechanical anchorage system; full security.
- Plane modulation and level with the facade. Horizontal or vertical angle. With straight or locked joints.
- Horizontal placement joints of between 5 mm and 8 mm in width. Vertical placement joints from 1 mm in width.
- Wide variety of plate formats: from 1200 mm x 2500 mm to 5500 mm x 3000 mm.
- Mesh on the back of the pieces to prevent fragments from falling in the event of breakage.
- Resistance to climate agents; the elements' physical appearance remains unchanged with the passage of time.
- Easy to clean in the event of paint marks or graffiti.
VF XLIGHT/XTONE
Ventilated facade with hidden anchorage.
XLIGHT/XTONE porcelain stoneware pieces are supplied with metal pieces with which the anchor staples are fixed to the vertical pillars. These determine a system of slots into which fit the facade fastening clips.
Technical details
VF XLIGHT/XTONE
Ventilated facade with visible anchorage.
The XLIGHT/XTONE porcelain stoneware pieces fit into a stainless steel staple in such a way that the fastening clips remain visible. Depending on the coating model, it is possible to wash them, depending on the RAL the client has chosen.
Technical detailsVF XLIGHT/XTONE
Ventilated facade with hidden anchorage. C-Bolt system.
XLIGHT/XTONE porcelain stoneware pieces are supplied with the anchorage fixed onto the back by means of expansive screws that fit into a horizontal rail system which is fixed to the facade structure. The system allows adjustment in all three directions and is completely hidden. System only valid for XTONE designs of 9 mm and 12 mm in thickness.
Technical details
-
MODFACADES
Modular facade system that is supplied completely ready-to-go from the factory. All the elements include PORCELANOSA Group insulation, structure and finishes.As it is a product made in a workshop, it features numerous advantages over a traditional facade. This system guarantees high quality construction by creating a standard solution with high technical performance, which is also adapted to the needs of the project. This allows for complete control of the manufacturing and installation process.
As it is a PORCELANOSA product, it comes with ongoing technical support and a quality guarantee.
The modules are formed of hot-galvanised steel frames, two layers of rock wool of different densities, A1 class cemented panel and an exterior finish with XLIGHT or XTONE rectified ceramic plate. The interior is finished with a galvanised steel plate which is fixed to the frame.
It has an EPDM and PVC joint system which creates a cavity between panels, facilitating dilatation, alignment and water tightness, which helps to prevent water from entering. The elements are fixed to the forged elements by means of galvanised steel anchor plates that allow regulation on the three Cartesian axes. There is also the possibility of including windows and extra details inside the boxes.
Main features
- Reduced construction time.
- No auxiliaries are required.
- Reduction in waste production and collection.
- Zero risk of price variation.
- Reduction in investment risk.
- High quality standard.
- Reduction of roles and on-site risk.
- Reduction of damages and repairs.
-
VF KRION
Ventilated facade system using KRION® Solid Surface plates.
It is characterised by a dual system of chemical and mechanical anchorage, between solid surface plates and an aluminium structure.
It is compact, homogeneous and luminous; it can be transformed by cutting, gluing, machining or thermo-bending; and its surface polish makes KRION® the ideal element with which to create. This material has been highlighted in contemporary architecture, and is presented in pieces measuring up to 6080 mm x 3680 mm.
KRION® parts are supplied machined for mechanical anchoring to the structure of the facade. Depending on the project, they can be engraved, backlit or combined with signage.
Metallic structure of ventilated facade- Mechanically anchoring the facade to the enclosure, according to the type of support.
- L-shaped aluminium separators determine the cavity between the enclosure and the KRION® ceramic coating.
- Vertical aluminium pillars onto which the KRION® porcelain stoneware plates are fitted.
- Self-drilling stainless steel screws to connect vertical pillars and aluminium separators.
- Stainless steel metal anchorage for fixing the KRION® plates to the vertical pillars.
The metallic structure of the ventilated facade is made of AW 6005A aluminium, while the mechanical anchors are AISI 304 stainless steel.
Main features- Anchoring the facade directly to the building structure and surrounding enclosure.
- Applicable to most types of structures and enclosures used in construction.
- Main structure simply formed by vertical profiles.
- Very light facade structure: less than 5 kg/m².
- It allows for 3D facade designs and overhanging pieces.
- Dual chemical and mechanical anchorage system; full security.
- Large areas without presence of joints, depending on the location and design of the project, available up to 6000 mm x 3700 mm.
- Total freedom in the facade design, including the use of curves.
- Modulation in as many plans as necessary.
- Possibility of engraving, cutting and perforation of the pieces, according to the design.
- Different types of open joint between the plates, reducing the visual impact of the joints.
VF KRION
K-FIX System.
KRION® plates are supplied on site with circular machining, onto which the stainless steel metal casings are fixed which are then screwed on to the facade structure. Once the KRION® piece has been fixed in place, the machining is covered and polished on site, to produce a completely smooth and homogeneous surface leaving no trace of machining.
Technical detailsVF KRION
C-Bolt System.
KRION® plates are supplied with metal staples fixed onto the back by means of expansive screws that fit into a horizontal rail system which is fixed to the facade structure, allowing the adjustment of the tiles in all 3 directions. There is no need for subsequent sanding on site and if the project requires it, KRION® pieces can be positioned in such a way that they can be easily removed; this is an essential requirement for backlit projects or those with built-in lighting systems.
Technical details
English · International